Last Updated: July 11, 2023 (Refresh Now)
VIVO Single Monitor Desk Mount Fully Adjustable Monitor Arm Stand with Clamp and Grommet Base Tilt Swivel Rotation Holds 1 Screen up to 22lbs with VESA 75x75mm or 100x100mm Black STAND V001
Last Updated: July 11, 2023 (Refresh Now)
7.9
SCORE
/10
Total Reviews
1000
Old Reviews
725
Unverified
33
Spam Test
!
Review Analysis - 242 recent, verified reviews
Detailed Mode
Body
104desk, space, monitor, tighten, easy to assemble
+70%
-30%
" ... This includes the two side grips on the plate & the security bolt is fully applied. ... Next, you’d want to insure the bolts on the arm are fully tightened to the adjustment you prefer, this will prevent sagging. ... "
" ... All steel, nice countersunk holes and screws where needed. ... "
" ... The height is adjusted with the screws as tension to hold in place on the vertical support. ... "
" ... Easy to assemble and sturdy. ... "
" ... it could also go up and down although you have to tighten/un-tighten to do so , other wise a very sturdy and maneuverable mount and i recommend for the price ... "
" ... This is my 3rd total one of these stands, and the first (and last) one that came with a screw already stripped/blocked by a metal piece in the hole. ... "
" ... This made a huge difference on my sit/stand desk, clears up so much space. ... "
" ... The arm stays in place and the monitor will not sag or drop. ... "
Size
86arm, mount, tighten, monitor, clamp
+58%
-42%
" ... I was looking to put a somewhat heavier monitor (14lb) on a stand to free up space on my electronic sit-stand desk. ... A nice design point that wasn't obvious when I bought it: the main pole comes in three parts that screw together. ... "
" ... !Super easy to assemble and adjust to fit your needs. ... "
" ... There were no problems with holding both sizes of monitor. ... But if you think about, once you're happy with a height when you initially install this mount, how often are you really going to make several height adjustments? ... Strong and Heavy Duty Mount ... "
" ... I run a 27" AOC monitor, pretty heavy overall and the stand holds it up like its nothing, i put some force on it and it does not budge either. ... "
" ... This is my 3rd total one of these stands, and the first (and last) one that came with a screw already stripped/blocked by a metal piece in the hole. ... "
" ... Great mount arm that works well. ... "
" ... In all fairness, I probably should be looking at a gas-spring mount for the clean yet sturdy offset look. ... "
" ... I was worried I wouldn’t find a mount that would work for my MSI 323CQR, since the area to mount is indented and most mounting plates were a little bigger than the spot on my monitor. ... "
Usage
61setup, easy to install, desk, easy to assemble, monitor
+97%
-3%
" ... Easy to install on my desk and my monitor pushes the weight limits almost to the max and still no problems with movement or sturdiness. ... "
" ... Easy to install, sturdy and surprisingly, pretty easy to maneuver. ... "
" ... Instructions are clear ... "
" ... I removed one of the arm links for cosmetic reasons (and I have no plans of moving the monitor around once setup). ... "
" ... Easy to set up and use. ... "
" ... Its easy to assemble ... "
" ... Fortunately everything functions very well and isn't too difficult to setup. ... "
" ... Very good just kinda hard to set up ... "
Stand
50mount, desk, vesa, arm, vivo
+82%
-18%
" ... I initially almost returned it because I forgot I received special mounting pieces for my monitor that were needed, without them there was about a quarter-inch gap between the mounting bracket and end of the screws. ... "
" ... Shopped around for a monitor arm longer than I probably should have. ... "
" ... I needed to be able mount the VESA plate on the pole directly. ... "
" ... it could also go up and down although you have to tighten/un-tighten to do so , other wise a very sturdy and maneuverable mount and i recommend for the price ... "
" ... This is a solid mount, does an excellent job holding the monitor and being able to adjust it. ... "
" ... I wanted my monitor as close to wall to keep a flush look. ... "
" ... This monitor arm is great. ... "
" ... The mount is easy to assemble with two different ways of assembly. ... I highly recommend this mount. ... "
Display
23curved, 34, tilt, inch, monitors
+70%
-30%
" ... Using a single unit for a 34” wide screen monitor and a double unit for two 20” +/- monitors. ... "
" ... I got this to mount my 38" curved ultra wide Alienware monitor over the top of a 49" curved super ultra G9Neo monitor (which is on its own stand). ... The description said it would hold the larger 38" curved screen if the weight was right. ... "
" ... A great fit with the LG 32UL500-W 32 Inch display. ... "
" ... As I assemble more screens for my set up, I will buy more of this model. ... "
" ... Holds my 24 inch Sceptre monitor easily and sturdily. ... "
" ... Can easily support my LG 34" curved monitor. ... "
" ... This was almost the perfect monitor stand for my 34" ultrawide monitor (HP X34). ... "
" ... Wasn’t too expensive either, overall would recommend for artists looking to mount their tablets and nonartists just looking to mount their screen!✨ ... "
Price
18money, worth, value, reasonable, purchase
+100%
" ... Very much worth the price. ... "
" ... You can 100% clearly tell that this was a used item, which I paid full price for. ... "
" ... Other than that is works great for a reasonable price. ... "
" ... You can't go wrong with this purchase especially if you are on a budget.😀😀😀 ... "
" ... Why buy a lesser alternative to save 10 bucks. ... "
" ... The price was good. ... "
" ... For the price, you can't go wrong. ... "
" ... I was skeptical at first on the price. ... "
Comfort
14hex, desk, loosen, tightened, bolt
+43%
-57%
" ... Looks nice but the hex head screws that came with it stripped as I was assembling the stand, making it unusable. ... "
" ... The arm is very difficult to adjust/tighten/loosen even with the hex key provided. ... "
" ... I've got the hex bolt tightened so tight I bent the hex wrench they provided and I feel that if I breath on it it's just going to flop over and be aimed down at my desk. ... "
" ... On the other hand pretty much every bolt that was already put in place is stripped which means I can’t loosen the arm for it to swivel easier. ... It’s annoying tho because it takes a lot of effort for very little movement. ... "
" ... Likewise, if the arm is too long for your intended use, you can detach it and use only the 2nd half of the arm. ... "
Marketplace
12amazon, returning, picture, photos, order
+50%
-50%
" ... From the moment I opened the Amazon box, I was disappointed. ... "
" ... But as shown in the picture, that joint would not move at all! ... "
" ... i ended up returning ... "
Cable
11clips, cable management clips, wires, holders, cable management
+100%
" ... Cable management clips are a nice inclusion as well. ... "
" ... Wire holders that are included hold the HDMI and power cable and keep it nice and neat looking. ... "
" ... I was hoping i could gid my wires in the tube cause i didnt see anything on wire hiding but the clips worked amazingly. ... "
" ... Also looks clean with included cable management options. ... "
" ... Great cable management and it comes with clips for your wires too. ... "
" ... Nice cable management. ... "
" ... Being able to adjust the height also seemed very practical and the supports for the cables very useful ... "
" ... The wire clips keep the wires clean and include tool storage if you ever need them in the future. ... "
Connectivity
10desk, port, neat, vesa, tilted
+80%
-20%
" ... I had it for an asus monitor for a little while before I got a new one, now it is one my XP pen pro 22R graphics monitor. ... "
" ... I have a dual monitor set up for work and then a third monitor on the side of my L-desk. ... "
" ... They are robust, purpose-built devices that do what they are supposed to do and do it well. ... "
" ... 2 for my computer monitors and i have 2 with TV's as well. ... "
" ... Holding my monitor. ... "
" ... My one concern is the (my terminology may be wrong) bolt which allows the monitor you connect to be tilted up or down. ... I can see this being an issue for someone making a standing work station with a laptop. ... "
" ... It had a special place for my cell phone with a small port that you could feed your headphones through, which seems neat, but is worthless because the idea of putting your phone in the backpack where you can't easily get to it is just dumb. ... "
" ... Wire holders that are included hold the HDMI and power cable and keep it nice and neat looking. ... "
Design
8monitor, design, black, sturdy, minimalistic
+100%
" ... I was worried it would like ugly being white with black pieces but it actually looks beautiful on my desk. ... "
" ... It is super sturdy, looks good too. ... "
" ... I appreciate the design and sturdiness of the product. ... "
" ... Looks way better too. ... "
" ... And it looks cool being offset. ... "
" ... The monitor looks very tidy this way, without the stand sticking out over top. ... "
Marketplace / Marketplace
7picture, photos, order, new, make
+71%
-29%
" ... Luckily, I was able to get better assistance from the manufacturer directly. ... "
" ... Going to order another one. ... "
" ... I bought this as a warehouse deal. ... "
" ... See attached photos. ... "
" ... I ordered this as an "almost new" product from Amazon and this is the last time I'll do that. ... "
Reliability
5years, working, perfectly, bought
+100%
" ... It works perfectly and I am exited to see how it preforms over the following months. ... "
" ... It's been up a few months now. ... "
" ... I one of my mounts I am going on 5 years of daily use with zero issues. ... "
" ... It is working perfect so far. ... "
" ... I bought this after my boyfriend bought himself one a few months back. ... "
Gaming
5gaming, desk, using, space, move
+80%
-20%
" ... I have tons of desk space now and I can move the monitor closer to me when gaming. ... "
" ... I bought this monitor mount for my gaming monitor and it is a must for gamers. ... "
" ... Feels amazing to have a nice setup and have a .80 KD on most games lol ... "
" ... There’s so much more room on my desk, plus I can pull the monitor out when I’m watching stuff or gaming. ... "
Performance
4job, white, setup, overall, job done
+100%
" ... This gets the job done for a cheaper price than others, especially since I wanted it in white to more seamlessly blend into my setup and there are not a lot of white options. ... "
" ... Great upgrade to my computer desk. ... "
" ... Overall, it does the job really well. ... "
" ... Now that it is attached, it seems to be doing its job fairly well. ... "
Marketplace / Returns
4send, return, order, ended, back
+25%
-75%
" ... i ended up returning ... "
Cleaning
4look, desk, setup, really, mount
+100%
" ... Good, clean look, easy to put together and setup. ... "
" ... In all fairness, I probably should be looking at a gas-spring mount for the clean yet sturdy offset look. ... "
Review Spam Test
In order to keep our review summaries as accurate as possible, we aggressively detect fake reviews. We use various signals to detect unnatural patterns and will gradually expose them here.
Spam Test could not be completed. Click here to retry.
Specifications
No specs available.
Recommendations
...