Last Updated: March 25, 2022 (Refresh Now)
Stick on Anywhere Portable Little Light Wireless LED Under Cabinet Lights 10 LED Motion Sensor Activated Night Light Build in Rechargeable Battery Magnetic Tap Lights for Closet Cabinet Silver2
Last Updated: March 25, 2022 (Refresh Now)
8.2
SCORE
/10
Total Reviews
1000
Old Reviews
161
Unverified
13
Spam Test
!
850 mAh
BATTERY CAPACITY
120 meters
SIZE
LED
TYPE
Review Analysis - 826 recent, verified reviews
Detailed Mode
Battery
234recharge, charged, batteries, charging, lights
+83%
-17%
" ... Recharging on laptop is simple. ... "
" ... They are perfect and rechargeable!! ... "
" ... Hold a charge for quite a long time before needing to be re charged. ... "
" ... If the light starts looking dim, I just plug up for a recharge. ... "
" ... They work great and have a long lasting battery life, at least a week. ... "
" ... I charged them when I received them and they are still going great after five months! ... "
" ... The charge lasts a long time ... "
" ... Haven’t charged them yet but so simple to recharge and not burn out batteries. ... "
Usage
187closet, easy, light, bathroom, installation
+96%
-4%
" ... Easy to install ... "
" ... Easy to install. ... "
" ... Easy to install. ... "
" ... I have 2 in my closet. ... Give good light and you can control the motion sense on the side buttons. ... "
" ... The lights are very easy to install . ... "
" ... I got these lights for a dimly-lit pantry closet. ... "
" ... These were very easy to install. ... "
" ... Or bathroom at night. ... "
Battery / Charging
160charging, recharge, charged, lights, long time
+83%
-17%
" ... I absolutely love these little usb chargeable lights. ... They charge quickly too. ... "
" ... They will be easy to recharge. ... "
" ... Maintains charge for a long time. ... "
" ... If the light starts looking dim, I just plug up for a recharge. ... "
" ... I charged the lights fully before using. ... "
" ... Easy to install and charge ... "
" ... This I believe is my 3rd order, these little under counter lights work great and they have a usb charger, you don’t always have to go buy batteries ... "
" ... Great no batteries to charge. ... "
Body
124closet, pantry, metal, lights, light
+88%
-12%
" ... These have been wonderful in our travel trailer. ... "
" ... Nice size and good light for my pantry and closet. ... "
" ... The tape to adhere the magnetic stripe is holding up strong and the magnetic strip makes it easy to remove and replace after being charged. ... "
" ... I put 2 over unlit pantry just inside the door and one inside mini refrigerator and do the job perfectly. ... "
" ... Will mount on magnetic metal without metal strip. ... My cat goes thru kitchen to food and water . ... "
" ... It’s so convenient for everything and so portable ... "
" ... They are little but bright for their size. ... "
" ... Perfect for under shelf lighting ... "
Features
111lights, bright, lighting, closet, cabinet
+87%
-13%
" ... Perfect under counter lighting. ... "
" ... Tried replacing the bulbs, but I would also need to replace the light board inside. ... "
" ... I use them in cabinets in my RV and they throw tons of light. ... "
" ... This light is bright and seems to last forever! ... "
" ... This little light is fantastic! ... "
" ... Installed this light in my pantry and it is great! ... "
" ... at our cabin (with no lights). ... "
" ... Pleased with ease of deployment and with amount of light provided ... "
Size
104magnetic, tape, magnets, adhesive, strips
+70%
-30%
" ... It comes with a magnet for installation on the bottom of your cabinet. ... "
" ... with an optional steel / adhesive attactment ... with separate combined magnetic and adhesive attachment plate ... The unit I bought uses a 7” long with a steel bottom on the lamp and a 3M strip with a magnet strip on one side and adhesive back. ... (Note that 3M sells spare plates if a dual sided magnetic mount or a non magnetic spare as needed) ... "
" ... I like that I can use it almost anywhere there is metal for the magnet to stick and I can recharge it. ... "
" ... Easy to take down with the magnetic mounts. ... "
" ... I think they will be fine since the magnets used are pretty strong. ... "
" ... But they are magnetic, so easy to stick up on ferric metallic surfaces. ... "
" ... Portable, magnetic or use double stick tape (came with item) for a permanent spot. ... Also used as a handy mini flashlight! ... "
" ... They are so handy. ... "
Reliability
43weeks, month, lights, working, couple
+60%
-40%
" ... Worked great other than sticky tape which gave way after three days and had to be replaced ... "
" ... just wished they were capable to stay on a few seconds longer. ... "
" ... Working great in my coat closet and have a set in my pantry ... "
" ... They are working as they should! ... "
" ... (I just found a bunch of things I'd forgotten I owned or had no idea where they'd disappeared to over the years! ... "
" ... I had boughten these a couple weeks ago and installed them the second I got them! ... "
" ... I’ve bought them 3 times now. ... "
" ... Seems to last long. ... "
Price
34money, waste of money, worth the money, value, worth
+65%
-35%
" ... Nice for the price ... "
" ... Overall, a perfect solution for my needs at a decent price. ... "
" ... Good for the price ... "
" ... Could be brighter, but good for the price ... "
" ... I have similar product by different vendor with same price range, which I am using since last 2 yrs with no complains. ... "
" ... I almost purchased the upgraded model but now there was no need for the extra cost. ... "
" ... Worth the money spent. ... "
" ... This makes them an exceptional value. ... "
Marketplace
32seller, returning, works, order, window
+59%
-41%
" ... Exactly as described. ... "
" ... I ordered a set and will order more. ... "
" ... Will order more. ... "
" ... Exactly as advertised works grwat ... "
" ... Will probably order more. ... "
" ... I appreciate so much the fast delivery. ... "
" ... Will keep these, may return the others. ... "
" ... The one light works as described. ... "
Comfort
19hand, wave my hand, stick, fall, time
+47%
-53%
" ... They fall off all the time. ... "
" ... I place two of the lights under somekitchen cabinets and after about a week the fell off and the glue on the sticky pads will not hold them. ... "
" ... They fall due to poor lighting a lot of times. ... "
" ... Did not hold well to one surface it was applied to. ... "
" ... I’ve tried turning them off and then right into the “G” position. ... "
" ... They fell off in a week. ... "
" ... The light is bright and the concept is great but it keeps falling down. ... "
" ... If I turn it on manually, I have to use both hands to stabilize it or it falls to the counter. ... "
Marketplace / Marketplace
18works, photos, order, one, amazon
+83%
-17%
" ... Will probably order more. ... "
" ... After buying two, ordered two more and now ordered four more on top of the first 4. ... "
" ... Had a problem with one of the lights, seller replaced it. ... "
" ... Exactly as advertised works grwat ... "
" ... So happy to find at Amazon :) ... "
" ... Exactly as described. ... "
" ... Will order more. ... "
" ... The one light works as described. ... "
Display
18bright, led, light, easy to install, lights
+94%
-6%
" ... The light’s brightness is perfect for our kitchen pantry. ... "
" ... The brightness is just enough for dark places at night. ... "
" ... Good brightness as well! ... "
" ... A snap to install, bright but not too bright. ... "
" ... Bright little lights! ... I purchased the lowest of LEDS & impressed with the brightness. ... "
" ... The only thing I would like to see is maybe the option for a warmer yellow light and not just the bright LED. ... "
" ... Led, very bright. ... "
" ... Attaching led lamps ... "
Camera
17night, bright, motion, flash, dark
+100%
" ... I turn them on to motion detect at night before I go to bed and they light my dark stairwell when I stumble out of bed for my 2 am trip downstairs. ... "
" ... Driving the car – both in daylight/dusk/night ... "
" ... This little light is excellent and I feel much more secure walking at night with Motion sensor feature. ... "
" ... Provides light in dark little spots. ... "
" ... Nice to have in the master bath under the vanity at night, just the right amount of light. ... "
" ... The picture was taken at night with an iPhone X without flash. ... "
" ... Great for use as s night light also. ... "
" ... At night, it serves at night lights. ... "
Marketplace / Returns
13returning, window, replacement, refund, disappointed
+15%
-85%
" ... I was disappointed so had to return both. ... "
" ... I'm returning and purchasing another brand. ... "
" ... So I will be returning them. ... "
" ... Not worth my time to return and refund. ... "
" ... Will be returning. ... "
" ... I was unhappy that this broke the same day I got it. ... "
" ... Unfortunately can’t return as window has expired ... "
" ... I would like to return it but returns window is closed ... "
Connectivity
13port, love, charging, recharge, micro
+100%
" ... Neat feature is that it can be set to ONLY activate when in the dark - or it can be set as most other similar devices merely by the arrival of a warm body. ... "
" ... I just plug it into my computer and leave it. ... "
" ... We are tech people and because you don't need batteries but can recharge this light on USB port is an added bonus. ... "
" ... The charging port is easy to access and feels tight and secure. ... "
" ... Lots faster than via computer. ... "
" ... I absolutely love these little usb chargeable lights. ... "
" ... Recharge with a USB port. ... "
" ... Has USB cable for charging. ... "
Design
12looks, also, sleek, like, light
+100%
" ... It is also magnetic which adds another feature that I like. ... "
" ... Also nice looking. ... "
" ... This is a perfect addition to your Creality 3D printer. ... You can easily attach it to the metal cross beam and it provides ample light on your printing project. ... "
" ... The idea is great, the design is great (very sleek), but it's not very useful if you have to recharge every 5 days or so, and that's without it going on automatically in the dark. ... "
" ... Also, looks nice in areas where it shows at all. ... "
" ... The light is bright and I can see the controls on the printer or review what ever I am printing without removing the item from the cabinet. ... "
" ... Love these kitchen looks amazing ... "
" ... Perfect light for my CR-10 Mini 3D printer. ... I also used three of these lights for my Anycubic i3 Mega-S 3D printer. ... "
Color
10brightness, white, dark, bright, like
+70%
-30%
" ... The led lights are bright. ... "
" ... I purchased the lowest of LEDS & impressed with the brightness. ... "
" ... The light is bright white. ... "
" ... Good brightness as well! ... "
" ... The brightness is just enough for dark places at night. ... "
" ... Would be AWESOME if they offered a little warmer LED color. ... "
" ... The brightness is perfect for dark small spaces like a closet. ... "
Cable
8usb, included, cord, charge, wires
+100%
" ... No need to run wires, great product. ... "
" ... Best part is they're rechargeable with a micro USB cord. ... "
" ... Comes with 1 charging cable per 2 lights. ... "
" ... So easy and no plug in cords. ... "
" ... They hold a long charge and charge fairly fast with the included usb charge cable. ... "
" ... They are extremely bright, I love they are battery and rechargeable - I recharge once a month and do not need to worry about a cord. ... "
" ... If you're like us you have a drawer full of these charging cables. ... "
Stand
7stick, magnetic, strong enough, plate, ceiling
+29%
-71%
" ... it was difficult to stick it to the ceiling/finished ceiling surface in the wall drobe. ... "
" ... the only thing I was disappointed about it I had to take them down to repaint my wall and the magnetic plate it came with was hard to get off and became all lumpy and unusable and I had to toss them . ... "
" ... The stick on they provide rips the paint and drywall off the wall. ... "
Marketplace / Product As Described
7photos, one, picture, exactly, described
+86%
-14%
" ... One of them no longer works as you can see in the photos ! ... "
" ... Works as advertised. ... "
" ... Exactly as advertised works grwat ... "
" ... Exactly as described. ... "
" ... The one light works as described. ... "
Food
6stove, light, use, cooking, lights
+83%
-17%
" ... I use one over my stove and it really helps as the microwave light over stove is burned out. ... Gives me adequate lighting when cooking. ... "
" ... I've started dehydrating foods and this light will be very helpful! ... "
" ... Now I can see what is cooking on the stove and if it is done or not. ... "
" ... Yes, it works while I cook. ... "
" ... It's now just a huge dark cavity with our larger kitchen appliances we don't use very often (slow cooker, panini grill, etc.). ... "
Wash
4dishes, clothes, closet
+100%
" ... I set them right above my closet facing the clothes. ... "
" ... I put one of these under my cabinet that is over the sink for when I am washing dishes. ... "
" ... Have in linen closet and clothes closet work great. ... "
" ... I switch it to stable on, when washing dishes. ... "
Sound
4bathroom, get
+100%
" ... Or bathroom at night. ... "
" ... I work in a dark room at 4am. ... "
" ... the brightness is perfect, i have a small apartment so it is easy to illuminate the space therein ... "
" ... I would have preferred a warmer tone. ... "
Performance
4motion, detection, computer
+100%
" ... It does the job. ... "
" ... I wish they looked a bit fancier but they do the job! ... "
" ... It does the job I purchased them for. ... "
" ... Lots faster than via computer. ... "
Marketplace / Delivery
4fast, delivery, ordered
+100%
" ... I just got a two-pack today. ... "
" ... Ordering and delivery were a snap -- fast and efficient. ... "
" ... I ordered a set and will order more. ... "
" ... I appreciate so much the fast delivery. ... "
Programs
33, modes
+67%
-33%
" ... It was always dark by my sink when I washed dishes in the evening. ... "
" ... Lamp modes combination of 2 or 3 modes ... "
Print
3light, printing, 3d
+100%
" ... This is a perfect addition to your Creality 3D printer. ... You can easily attach it to the metal cross beam and it provides ample light on your printing project. ... "
" ... The light is bright and I can see the controls on the printer or review what ever I am printing without removing the item from the cabinet. ... "
" ... Perfect light for my CR-10 Mini 3D printer. ... I also used three of these lights for my Anycubic i3 Mega-S 3D printer. ... "
Review Spam Test
In order to keep our review summaries as accurate as possible, we aggressively detect fake reviews. We use various signals to detect unnatural patterns and will gradually expose them here.
Spam Test could not be completed. Click here to retry.
Specifications
Battery
Battery Capacity: 850 mAh
Body
Size: 120 meters
Display
Type: LED
Recommendations
...