Last Updated: November 27, 2021 (Refresh Now)
RODE PSA 1 Swivel Mount Studio Microphone Boom Arm
Last Updated: November 27, 2021 (Refresh Now)
8.2
SCORE
/10
Total Reviews
999
Old Reviews
771
Unverified
34
Spam Test
PASS
32.5 meters
SIZE
Review Analysis - 194 recent, verified reviews
Detailed Mode
Body
95tension, boom arm, tighten, clamp, rode
+78%
-22%
" ... Just returned the Blue Compass because middle joint got broken and there's no comparison at all this is way better and sturdier, and less annoying because is slimmer. ... "
" ... Whimy is it so expensive the quality is sturdy but I don't see anything special with it I like it but I feel like I was scammed ... "
" ... Works great with my quad cast and if your having troubles with it remember to tighten the arm ... "
" ... This arm also holds firm and has never fallen while using it. ... "
" ... Very sturdy and flexible. ... Holds my shock mount and yeti very firmly. ... "
" ... The arm itself is very sturdy. ... "
" ... I mounted this arm on an upper book shelf, with the RODE NT-1 mounted upside down. ... It pulls down to position perfectly when I need it, and out of the way when not. ... "
" ... I use it on a Rode PodMic very sturdy smooth ... "
Body / Build Quality
75tension, clamp, joints, boom arm, spring
+73%
-27%
" ... Refer to bottom for quick pros/cons of each boom arms ... It has one screw on the top joint that controls all the tension. ... You dont even have to adjust the other joints. ... With the Rode, you just have to tighten on the top joint screw and it will stay. ... I can live with thr slightly wider clamp and I can easily buy boom arm cable sleeves or cable sleeves to address the housing issue. ... In comparison, I like how simple and clean the Blue Compass looks for a 100 dollar boom arm. ... -small strong desk clamp ... -Has Tension screw ... -Has Tension screw (on highest joint) ... "
" ... The joints can be tightened or loosened depending on how you like the tension. ... "
" ... Bite the bullet, pay a little extra to get the Rode, you will not regret it. ... "
" ... Plenty of range, very sturdy. ... "
" ... The Boom Arm is very well designed. ... Plus, the arms come with 4 small velcro wraps to secure the cables into place. ... My hats off to Rode on quality workmanship! ... "
" ... This is an amazing stand and holds one of my yetis without batting an eye. ... "
" ... Just returned the Blue Compass because middle joint got broken and there's no comparison at all this is way better and sturdier, and less annoying because is slimmer. ... "
" ... It can handle heavy microphones (I use the Shure SM7B and no problems at all). ... "
Body / Fit
49tension, tighten, clamp, mic, rode
+69%
-31%
" ... Wires fit nicely into the swivel points without any bunching or getting caught. ... "
" ... The joints can be tightened or loosened depending on how you like the tension. ... "
" ... Holds my shock mount and yeti very firmly. ... "
" ... Very useful handy convenient holds my shure mic ... "
" ... This RODE Swivel Arm is awesome. ... "
" ... I now have no more fear of my mic falling cause it holds it in place like a statue. ... "
" ... This is an amazing stand and holds one of my yetis without batting an eye. ... "
" ... Holds the mic perfectly wherever it's placed - once the tension screw is adjusted. ... "
Body / Comfort
33boom arm, tension, tighten, position, spring
+82%
-18%
" ... Feels amazing I have a ride podmic and it’s like a match made in heaven it moves seamlessly and stays in place 10/10. ... "
" ... I now have no more fear of my mic falling cause it holds it in place like a statue. ... "
" ... Works great with my quad cast and if your having troubles with it remember to tighten the arm ... "
" ... These are definitely not the cheapest boom arms, however I can tell you from experience that these are definitely one of the best. ... "
" ... -small strong desk clamp ... -Has Tension screw (on highest joint) ... "
" ... I did a lot of research before finally deciding to drop my $100 on this arm. ... I love this arm, mine’s a little squeaky when I adjust it at a specific threshold but I don’t need to move it often enough for it to bother me. ... "
" ... This really is the best boom arm . ... "
" ... Velcro straps are great quality. ... "
Usage
21easy to install, install, easy, tension, super
+95%
-5%
" ... Super easy to set up, really it’s “plug and play.” Great range, can handle ‘unconventional’ set ups (like mine) as well as professional “everything is in the right place” studio set ups. ... "
" ... Chrome Knobs to hold tension stripped immediately after setup. ... "
" ... Easy to install, use, and adjust. ... "
" ... The only thing that has lasted since I bought it in my setup. ... "
" ... Easy to set up. ... "
" ... The setup was very straightforward, and I had the arm up in record timing with the Yeti attached. ... "
" ... Excellent range of motion, easy to install, plain looking. ... "
" ... Easier to quickly move out of the way. ... "
Stand
18arm, shock, desk, swivel, blue yeti
+67%
-33%
" ... This is likely due to the weight of my mic/shock mount. ... "
" ... Let me start by saying I used a $15 Neewer boom arm for over a year for my AT2020 and Shock Mount. ... "
" ... Holds my shock mount and yeti very firmly. ... "
" ... This works perfectly for my Blue Yeti blackout edition and shock mount. ... "
" ... With this one I drilled a hole right into my tabletop and used the mounting fixture that came with this and, this is so great! ... This stand goes where I put it and stays, high or low, in or out or tilted . ... "
" ... * For other mounts I've spent $100 on, they were much sturdier when mounted. ... "
" ... This mount is amazing. ... "
" ... This mount is amazing! ... 10/10 stand would recommend to anyone with a flat-mount desk! ... "
Price
18arm, 100, worth the price, worth the money, worth
+78%
-22%
" ... For a 100$ I wonder how much did the RODE logo contribute to price mrrrr . ... "
" ... Super fair pricing in a time where many businesses are price gouging. ... "
" ... If you're looking in this price range tho. ... "
" ... But for the money, it's 100% worth the price and otherwise is very well built. ... "
" ... Every penny that is worth is worth it for this arm. ... "
" ... After using it for a little while now, I can tell you that it is easily the greatest bang for your buck when it comes to adjustable arm mounts for microphones. ... "
" ... Worth the extra money. ... "
" ... Great boom arm for the price! ... "
Usage / Setup
15easy to install, install, easy, tension, super
+93%
-7%
" ... Holds up any microphone I have used on it, and easy to setup and use. ... "
" ... Super easy install as well! ... "
" ... Easy to install, use, and adjust. ... "
" ... The only thing that has lasted since I bought it in my setup. ... "
" ... The setup was very straightforward, and I had the arm up in record timing with the Yeti attached. ... "
" ... Super easy to set up, really it’s “plug and play.” Great range, can handle ‘unconventional’ set ups (like mine) as well as professional “everything is in the right place” studio set ups. ... "
" ... Chrome Knobs to hold tension stripped immediately after setup. ... "
" ... What a great unit, don’t miss out for your desk setup…. ... "
Marketplace
14sent, return, box, seller, damaged
+43%
-57%
" ... Rode said just to return it and get my money back, and just order from another dealer. ... The box was also in rough shape when it came in. ... "
" ... Was concerned that it would be a counterfeit- but NOPE! ... "
" ... Contacted the seller and never got a response. ... "
" ... However, my box came heavily damaged and taped up (looks like it was opened, probably to see if it was damaged, then taped up.) ... "
" ... Within days the thumbscrew had broken and this was sent back to Amazon. ... "
" ... I’m fairly sure the one i received was broken. ... "
" ... Wish I would've not put this off in time to try for a replacement. ... "
" ... Unfortunately this arrived just as I was leaving the country for a month, so I couldn't return it by the time I installed it and got to try it out. ... "
Cable
13xlr cable, cable management, straps, mic, cable sleeves
+77%
-23%
" ... Easy to mount and use, it comes with cable holder straps. ... "
" ... I purchased the blue yeti arm first because it was more attractive and had better-hidden cable management. ... "
" ... Velcro cable straps are nice and the overall construction is nicer and sturdier then the cheap ones. ... "
" ... The cable management is kinda meh, but it's good enough. ... "
" ... Personally I'd recommend this mount over anything out there and a 15 ft cord for your microphone so that you can position the boom where you prefer without any worry of not having enough cord length. ... "
" ... It does take more effort granted but i routed my xlr cable through the openings in the outer tubes and it works great. ... "
" ... The rotation points have places to insert cables through. ... Plus, the arms come with 4 small velcro wraps to secure the cables into place. ... "
" ... There are Velcro strips to keep the microphone cable in place. ... "
Sound
11arm, metal on metal, spring, noise when moving, springs
+36%
-64%
" ... After about a year I started to get a horrible metal on metal grinding sound. ... "
" ... This made so much noise metal on metal so I sent it back and got charged a restock fee of 20.00 for a damaged product. ... "
" ... The Spring arm did as I expected, make a lot of noise when moving around. ... It's a step up from the spring arms that make an adible noise when moving around. ... "
" ... I can hear metal on metal from the slider running against the frame. ... I also hear the internal springs popping and moving. ... After dealing with the noise for several months, I just decided to buy a different brand arm. ... "
" ... First one I got had a rough loud spot, and some metal grinding noise. ... "
" ... For me, the biggest issue (aside from not being about to put it in a position that would work) is that it makes vibrational noises that my mic picked up, and you can hear the springs or metal pieces inside of it!! ... "
Reliability
11months, last, broken, year, useless
+55%
-45%
" ... I've owned this product for a few months now. ... I expect this to last me a few years into the future (hopefully). ... "
" ... I am hoping this will last a few years, it gets used constantly. ... If it lasts, even three years, it will be worth it in my mind to purchase a replacement. ... "
" ... I now do this every few months as needed. ... "
" ... It works well for a long while, until it starts squeaking. ... It will last you a long time though. ... "
" ... Had this for a few years now and still works perfectly. ... "
" ... Have used it for about 3 years now. ... "
Usage / Ease
10easy, super, sturdy, move, microphone
+100%
" ... Super easy install as well! ... "
" ... Easier to quickly move out of the way. ... "
" ... Holds up any microphone I have used on it, and easy to setup and use. ... "
" ... Easy to install, use, and adjust. ... "
" ... Easy to install. ... "
" ... Easy to set up. ... "
Sound / Sound Quality
10arm, metal on metal, spring, noise when moving, springs
+40%
-60%
" ... After about a year I started to get a horrible metal on metal grinding sound. ... "
" ... This made so much noise metal on metal so I sent it back and got charged a restock fee of 20.00 for a damaged product. ... "
" ... The Spring arm did as I expected, make a lot of noise when moving around. ... It's a step up from the spring arms that make an adible noise when moving around. ... "
" ... I can hear metal on metal from the slider running against the frame. ... I also hear the internal springs popping and moving. ... After dealing with the noise for several months, I just decided to buy a different brand arm. ... "
" ... First one I got had a rough loud spot, and some metal grinding noise. ... "
" ... For me, the biggest issue (aside from not being about to put it in a position that would work) is that it makes vibrational noises that my mic picked up, and you can hear the springs or metal pieces inside of it!! ... "
Body / Size
9desk clamp, boom, yetti, wherever, shockmount
+100%
" ... I wanted this stand for my desk, not the studio though. ... "
" ... Allows for use sitting or standing. ... "
" ... (PSA1 Rode lacks)The desk clamp is small , sleek and easy to attach to any desk. ... -small strong desk clamp ... "
" ... But like any boutique product, it's got a 'one-size-fits-all' approach. ... "
" ... The arm handles the weight beautifully and keeps the end level wherever you move it. ... "
" ... * Holds my U87ai and shockmount well (can handle the weight) ... "
" ... Other than that, it's handy dandy. ... "
Marketplace / Marketplace
8sent, seller, counterfeit, contacted, usual
+63%
-38%
" ... I was so excited because I have had no issues in the past with this brand/item. ... "
" ... Great seller, fast delivery and careful Packaging. ... "
" ... Here is my original review: ... "
" ... Thanks for the great experience, I will be a returning customer! ... "
" ... Contacted amazon who as usual sent me a new one and it is exactly what I want. ... "
Marketplace / Returns
7sent, back, unfortunately, thanks, sold
+29%
-71%
" ... Rode said just to return it and get my money back, and just order from another dealer. ... "
" ... Contacted the seller and never got a response. ... "
" ... Within days the thumbscrew had broken and this was sent back to Amazon. ... "
" ... Wish I would've not put this off in time to try for a replacement. ... "
" ... Unfortunately this arrived just as I was leaving the country for a month, so I couldn't return it by the time I installed it and got to try it out. ... "
Performance
5done
+100%
" ... I use it 3 times a week for hours at a time and it gets the job done and done right. ... "
" ... Operates perfectly and super smooth. ... "
" ... It does it’s job. ... "
" ... Since it does the job, I'll give it 4 stars. ... "
Cleaning
5compass, blue, sturdy, looks, joints
+80%
-20%
" ... I prefer this base to the Blue Compass, and no obvious banding on the arm makes it look a lot cleaner than the compass IMO. ... "
" ... In comparison, I like how simple and clean the Blue Compass looks for a 100 dollar boom arm. ... "
" ... WD-40 to clean(shine) and make it less squeaky if it ever gets to that point. ... "
Body / Design
5sturdy, sleek, position, looks
+100%
" ... Sometimes the classic look is best. ... "
" ... It's sturdy, nice finish. ... "
" ... Definitely look elsewhere if you like to actuate your mics position a lot. ... "
Body / Storage
4holds, wish, weight, space, need
+100%
" ... We'll see how it holds up but so far I'm very happy and highly recommend. ... "
" ... I didn't realize that it need a minimum capacity to function properly, so with my AT2020 and minimal shockmount and filter, it kind of bounces back up, even after tightening the bottom screw joint near the mount, but I should've read the description a bit better, because it was there. ... "
" ... Solved an issue with space. ... "
" ... * Holds my U87ai and shockmount well (can handle the weight) ... "
Review Spam Test PASS
In order to keep our review summaries as accurate as possible, we aggressively detect fake reviews. We use various signals to detect unnatural patterns and will gradually expose them here.
PASS
Review Count Per Reviewer
PASS
Unverified Review Streak
PASS
High Velocity Reviewers
PASS
Inactive Reviewers
PASS
Reviewer History Overlap
Specifications
Body
Size: 32.5 meters
Recommendations
...