Last Updated: October 18, 2019

OVERTURE PLA Filament 1 75mm with 3D Build Surface 200mm 200mm 3D Printer Consumables 1kg Spool 2 2lbs Dimensional Accuracy 0 05 mm Fit Most FDM Printer Black

Last Updated: October 18, 2019
8.4
SCORE
/10
Total Reviews
287
Old Reviews
0
Unverified
15
Spam Test
PASS
7.87 meters
SIZE

Review Summary - 272 recent, verified reviews

Detailed Mode
Print Quality
 124
print, filament, printing, pla, printed
+85%
-15%
comment
" ...  Print quality was good, and surface came out glossy and without any large defects. ... It's no boutique filament, but for general purpose printing and use, it definitely fits the bill.  ...  "
comment
" ...  Prints keep coming very soft for some reason  ...  "
comment
" ...  Used 1 full roll of this filament and it printed great printed on ender3pro at 60mm/s 205* 55 on the bed and results were perfect.  ...  "
comment
" ...  This is the first roll of filament I ever bought and it's great easy to use for my very first ever print as long as machine is setup good no problems at all  ...  "
comment
" ...  I wanted to use as a cheap prototype and test print filament, but its so nice and well behaved I use it for tester AND final prints. ... I wish that they consider the box reuse after printing for stuff like that. ... You can see the printed cardstock ruler and the included build surface in the second photo.  ...  "
comment
" ...  I have been extremely impressed with the print quality of this filament. ... I cannot comment on the included print surface as it was smaller than my bed and I never applied it.  ...  "
comment
" ...  Awesome filament nice and cheap and you can get a heckton of prints also a nice pretty red  ...  "
comment
" ...  They don’t fit my printer they are too small but I’m sure they are great quality.  ...  "
Track custom deep topics?
For Brands, Sellers & Businesses
Price
 42
filament, money, pla, value, purchase
+98%
-2%
comment
" ...  buy it try it because this filament is high quality and the price is great.  ...  "
comment
" ...  The price was $1 cheaper than the normal brand I purchase, but it gave much more value.  ...  "
comment
" ...  Can't beat it for the price!  ...  "
comment
" ...  But for my needs, the at the cost, it fits the bill.  ...  "
comment
" ...  Worth the purchase in so many ways.  ...  "
comment
" ...  Great filament at a great price will definitely buy again  ...  "
comment
" ...  I’d definitely purchase more from this brand, at the price it’s a sweet deal!  ...  "
comment
" ...  Is it a good filament for a great price - ABSOLUTELY.  ...  "
Build Quality
 42
build plate, pla, filament, bed, spool
+60%
-40%
comment
" ...  Also came with a nice build plate with a 3m sticky back on it wich I thought was a nice touch so you can always have a nice surface to print on.  ...  "
comment
" ...  My parts came out just as good as if I were to use Esun.  ...  "
comment
" ...  In either case all of the other filaments I have gotten from Overture have been top notch.  ...  "
comment
" ...  And the build surface that comes with it is very good as well.  ...  "
comment
" ...  Inter-layer bonding is good. ... I bought the basic black and its a nice black, not thin and weak like other filaments. ... I have not tried the build surface yet, I will and update my review. ... The box it comes in is one of the clam-shell types.  ...  "
comment
" ...  The top layers can be a little rough, but the walls are beautiful.  ...  "
comment
" ...  Great first layer adhesion with no warping or lifting. ... Have not used yet but seems high quality and I like the texture to it.  ...  "
comment
" ...  This is now my "go to" material.  ...  "
Color
 36
color, filament, pla, blue, white
+97%
-3%
comment
" ...  I will be trying the other colors  ...  "
comment
" ...  Best filament I have used in this color.  ...  "
comment
" ...  I've already used four colors and I've had no problems with them, they printed evenly and smoothly and the colors don't fade as they print.  ...  "
comment
" ...  I have really enjoyed the color and finish of this PLA.  ...  "
comment
" ...  This is much smoother on the roll and reminds me more of Hatchbox in texture and color.  ...  "
comment
" ...  Quality PLA and vibrant colors  ...  "
comment
" ...  I love this filament works perfect and you get a lot for a small proce will definitely be buying more and multiple colors I've made 2 baby groots 7" tall x 4" wide or so a small golem from lord of the rings a bulldozer toy for a friends kid and a can coozie  ...  "
comment
" ...  I have all 6 filament colors.  ...  "
Fit
 21
build plate, printed, bed, adhesion, snapped the filament
+81%
-19%
comment
" ...  The durability is great, I printed a Mini ITX computer case with this filament and it has been holding up great even with the heat of the GPU and CPU.  ...  "
comment
" ...  The build surface that came with this filament doesn't tear and holds stronger than painters tape.  ...  "
comment
" ...  Works as advertised sticks to build plate nicely  ...  "
comment
" ...  But for my needs, the at the cost, it fits the bill.  ...  "
comment
" ...  Great first layer adhesion with no warping or lifting.  ...  "
comment
" ...  Prints very nice, goes down nice, no tangles, bonus build plate is a nice touch (could be bigger) overall though a great filament and value.  ...  "
comment
" ...  I’ve previously purchased bag spools that just constantly snagged or clogged but this has been great.  ...  "
comment
" ...  They don’t fit my printer they are too small but I’m sure they are great quality.  ...  "
Product Reliability
 15
filament, yet, worked, using, never
+93%
-7%
comment
" ...  I am changing my review to five stars after finishing the spool and also using several other overtire products.  ...  "
comment
" ...  i have been trying a few different filament brands over the past couple months, apart from my usual hatchbox.  ...  "
comment
" ...  I have been using overture exclusively for 3 months now and have had no issues and I love it.  ...  "
comment
" ...  Will be ordering more this week!  ...  "
comment
" ...  No major issues.  ...  "
comment
" ...  Seems to be working fine.  ...  "
comment
" ...  It worked for 36 hours straight with out any issues.  ...  "
comment
" ...  Zero issues with clogging.  ...  "
Design
 15
finish, black, looks, used, red
+87%
-13%
comment
" ...  White it a lot better in adhesion, finish and looks. ... White is less brittle than the black.  ...  "
comment
" ...  I had no problems with this filament and it has great adhesion and finish.  ...  "
comment
" ...  Surface finish is a little on the glossy side but not bad. ... I bought the basic black and its a nice black, not thin and weak like other filaments.  ...  "
comment
" ...  The white is very "white", not milky or dull, but a true white. ... This white PLA has a very nice finish that doesn't detract from the details and has great adhesion.  ...  "
comment
" ...  The dark blue and black are great.  ...  "
comment
" ...  Similar in quality to Matterhackers MH, but with a glossier finish.  ...  "
comment
" ...  I used this for a series of printed parts, with relatively high detail.  ...  "
comment
" ...  Consistent finish and quality.  ...  "
Marketplace
 11
overture, basics, see, picture, ordering
+100%
comment
" ...  The spool itself also comes with several clever ideas, such as a gram counter and a meter counter(see picture) so you can quick glance and know if you have enough material before you start.  ...  "
comment
" ...  This is definitely my new supplier.  ...  "
comment
" ...  I'm pretty sure this is the same as Amazon Basics.  ...  "
comment
" ...  Note it looks better in real life than this picture.  ...  "
comment
" ...  Thank you Overture :)  ...  "
comment
" ...  I read the reviews and they said this was Amz Basic but by the vendor.  ...  "
comment
" ...  The best I have received off of amazon so far.  ...  "
comment
" ...  Overture is Amazon basics. ... Be honest Amazon!  ...  "
Cleaning
 10
clean, pla, adhesion, roll, prints
+80%
-20%
comment
" ...  The filament worked wonderfully, I had very little issue getting my prints to come out clean and consistent.  ...  "
comment
" ...  It extrudes nice and clean. ... The roll comes vacuum sealed in a reusable silver mylar bag.  ...  "
comment
" ...  I’ve previously purchased bag spools that just constantly snagged or clogged but this has been great.  ...  "
comment
" ...  Bed adhesion is excellent as well, also does not clog my creality cr-10 nozzle like other filaments.  ...  "
comment
" ...  Unlike some of the other white PLA that i have order, the lines are barely noticeable and prints come out very clean looking.  ...  "
comment
" ...  Vacuumed packed and in a box with a free build plate and discount coupon. ... Very clean pla for even extrusion.  ...  "
comment
" ...  No issues, no clog, melt as expected.  ...  "
comment
" ...  Packaged like all other filaments, vacuum sealed in package that’s even resealable.  ...  "
Comfort
 7
spool, part, like, kapton, good
+71%
-29%
comment
" ...  in fact, as soon as I completed this roll, I immediately ordered 3 additional rolls to have on hand.  ...  "
comment
" ...  But I will be buying again and as long as the QC stay good it will be my first choice.  ...  "
comment
" ...  This is my favorite PLA filament brand hands down.  ...  "
comment
" ...  The included adhesion pad has worked great  ...  "
comment
" ...  This stuff pretty much feels like Esun, definitely switching to Overture from now on!  ...  "
Overall performance
 6
performance, i3, price, cant beat
+100%
comment
" ...  it runs very reliably.  ...  "
comment
" ...  Smooth as it can be.  ...  "
comment
" ...  I will continue to purchase Overture filament, it's a great quality product with a even better performance.  ...  "
comment
" ...  Worked great with stock settings from the Prusa i3 MK3  ...  "
Screen Protection
 6
bed, adhesion, stick, painters tape, kapton
+83%
-17%
comment
" ...  And it includes a 200×200 built mat that I thought was a nice touch, and great adhesion, but I still prefer glass and gluestick!  ...  "
comment
" ...  70 degrees for the bed (glass)  ...  "
comment
" ...  This stuff sticks very well to magnetic and glass.  ...  "
comment
" ...  I've used glass with a gluestick, aluminum with painters tape, and aluminum with Kapton® tape with hairspray.  ...  "
Drying
 4
stick, spray, hair, glue, dry
-100%
comment
" ...  I can understand the dry breaking and possible old stock but the criss crossing on the rolls is just plain bad QC.  ...  "
comment
" ...  At half the spool It wouldn't stick using glue stick or hair spray.  ...  "
comment
" ...  You have to keep this filament very dry or the prints have a rough surface to them  ...  "
comment
" ...  If you print slow and hot, and you don’t have a tangled roll, it’s probably worth $15 for a plain black PLA, but why not just spend the extra $5-10 on a better filament and get better results in every category?  ...  "
Suction
 4
sealed, reusable, roll, filaments, comes
+100%
comment
" ...  The vacuum seal was also amazing.  ...  "
comment
" ...  Nicely vacuum sealed spools with reusable bugs.  ...  "
comment
" ...  The roll comes vacuum sealed in a reusable silver mylar bag.  ...  "
comment
" ...  Packaged like all other filaments, vacuum sealed in package that’s even resealable.  ...  "
For Running
 3
ender, different
+100%
comment
" ...  I have 12 machines running 24/7 and these spools have beaten out my hatchbox in performance.  ...  "
comment
" ...  it runs very reliably.  ...  "
comment
" ...  I have run 4 different types of filaments through my ender 3 so far, all from different companies.  ...  "
Ease of Use
 3
print
+100%
comment
" ...  Amazing filaments and easy to use and get dialed in.  ...  "
Software Platform
 3
user, settings, filament, error, windows
+67%
-33%
comment
" ...  The filament performed well and I love having the info on the spool and the use gauge and windows.  ...  "
comment
" ...  Works great, some issues but most likely user error but will continue to but, I just wish the had more colors like light blue, light red and similar colors  ...  "
Cables
 3
-100%
comment
" ...  Filament was tangled.  ...  "
comment
" ...  How the hell did they roll this up tangled?  ...  "
comment
" ...  However, the worst is a major tangle in the spool.  ...  "
Product As Described
 3
picture, counter
+100%
comment
" ...  Note it looks better in real life than this picture.  ...  "
comment
" ...  The spool itself also comes with several clever ideas, such as a gram counter and a meter counter(see picture) so you can quick glance and know if you have enough material before you start.  ...  "
comment
" ...  (Yes the picture says it is PETG, ignore that.  ...  "
Delivery
 3
well
+67%
-33%
comment
" ...  Excellent product, fast delivery.  ...  "
comment
" ...  Awesome product and well packed  ...  "
Lens
 3
bag
+100%
comment
" ...  The little bonuses are nice also although the free print surface is only 200mm x 200mm - much too small for my Ender 3.  ...  "
comment
" ...  It came in a vacuum sealed re-sealable bag with a big desiccant bag to capture any moisture.  ...  "
Storage
 3
space gray, use, storage, roll, filament
+100%
comment
" ...  The box it comes in is one of the clam-shell types. ... Like I said, I like the carboard box type: I reuse them for parts and roll storage.  ...  "
comment
" ...  I have gone through two rolls of space gray so far without any problems. ... The space gray liked 205C and 60C on the bed of my Prusa MK3s. ... The color of the space gray is almost identical to Prusament Silver.  ...  "
comment
" ...  I really like the quantity markings on the spool, but the resealable bag is my favorite feature.  ...  "
Size
 3
handy
+100%
comment
" ...  I REALLY like the paper ruler too, its actually pretty handy.  ...  "
comment
" ...  They also include a bed ruler thing thats handy.  ...  "
comment
" ...  Also, the spool includes both weight and length indicators on the side.  ...  "

Review Spam Test     PASS

In order to keep our review summaries as accurate as possible, we aggressively detect fake reviews. We use various signals to detect unnatural patterns and will gradually expose them here.

Specifications

Body
Size:  7.87 meters
7.87 meters
SIZE