Last Updated: 9 Apr 2019 (Refresh Now)

Monoprice Voxel 3D Printer White with Removable Heated Build Plate 150 x 150 mm Fully Enclosed Touch Screen Assisted Level Easy Wi Fi 8GB Internal Memory

Last Updated: 9 Apr 2019 (Refresh Now)
6.4
SCORE
/10
Total Reviews
52
Old Reviews
0
Unverified
13
Spam Test
WARN

Review Summary - 39 recent, verified reviews

Detailed Mode
Print Quality
 30
printing, 3d, filament, 3d printing, monoprice
+83%
-17%
comment
" ...  This is the first 3D printer that I have purchased. ... I needed a quick and easy to setup and operate printer for my shop so I can turn out really fast prototypes of small parts. ... For a small company that needs a price conscious printer this fits the bill.  ...  "
comment
" ...  I had the printer up and running, printing the example cube in about 15 minutes. ... I agree with the others that it helps to calibrate the printer before doing a print job. ... Depending on the object, it will print better in one orientation than another Don't be afraid to start over, I have re-printed a lot of parts as I was not satisfied. ... Have fun with this printer!  ...  "
comment
" ...  From unpacking to printing in literally less than 15 minutes. ... I don't have a lot of experience with 3D printers, this is my first one and I'm excited with how easy it is to use.  ...  "
comment
" ...  Super easy setup, and printing right out of the box. ... You can get the IP address from the About menu in the printer settings on the printer itself. ... For the auto-leveling, use a sheet of paper (the included “STOP and read this first!” paper works well) and lower the extruded until the paper can barely squeeze between it and the bed. ... It’s also easier to move around and store away than a non-enclosed printer.  ...  "
comment
" ...  This is hands down my favorite printer. ... So easy to use prints come out amazing.  ...  "
comment
" ...  Hands down, the easiest printer I have ever used besides the TAZ 6 and a few Stratasys printers at work. ... I have never experienced using a printer that worked right out of the box with this much ease.  ...  "
comment
" ...  It’s our first experience with a 3D printer and so far we have had only positive experiences with getting basic prints made.  ...  "
comment
" ...  For the price (320 approx) is the only closed 3d printer that I found.  ...  "
Track custom deep topics?
For Brands, Sellers & Businesses
Software Platform
 7
software, slicer software, monoprice, ip address, flashprint
+43%
-57%
comment
" ...  That means that anyone who likes to manage their network or have the printers on a specific IP or give them a DNS name is out of luck.  ...  "
comment
" ...  I don't care for the Flashprint software, but that could be just because of the old notebook computer that I am using it on.  ...  "
Fit
 7
spools, spool holder, print, spool, pulled
+71%
-29%
comment
" ...  I haven't tried my PETG yet, but it does fit the specs to handle it.  ...  "
comment
" ...  The filament is mounted inside the printer in a hole which perfectly fits their spools and nothing else.  ...  "
comment
" ...  For the auto-leveling, use a sheet of paper (the included “STOP and read this first!” paper works well) and lower the extruded until the paper can barely squeeze between it and the bed. ... It fits nearly perfectly.  ...  "
comment
" ...  For a small company that needs a price conscious printer this fits the bill.  ...  "
comment
" ...  When a print is complete, the feature to remove the pad from the printing chamber and the ability to slightly bend it to detach, helps keep the print intact while removing.  ...  "
Build Quality
 7
wood, side, fully, filament, bed
+86%
-14%
comment
" ...  I have tried wood filaments, clear, ABS, and different PLAs. ... The wood and clear ones were tricky, but I got the wood figured out.  ...  "
comment
" ...  I've removed the parts and reattached them simply out of curiosity, and everything is a breeze to disassemble and reassemble.  ...  "
comment
" ...  I can tell mine isn't quite level, but it's something like .1mm off so I can adjust my first layer height to compensate.  ...  "
comment
" ...  Perfect first layer. ... Perfect first layer. ... Fully 100% assembled.  ...  "
comment
" ...  The overall build quality is impressive.  ...  "
Setup
 6
instructions, simple, quick, printer, wifi
+83%
-17%
comment
" ...  Instructions are very clear, however, a quick youtube search found a full walkthrough that was even easier to comprehend and was hands on.  ...  "
comment
" ...  Super easy setup, and printing right out of the box. ... The WiFi setup is tricky but not difficult for an advanced user.  ...  "
comment
" ...  It's amazing to me how simple this was to setup and use. ... Simply removed it from the box, followed the simple quick start instructions and I had my test cube done in 15 minutes, no calibration.  ...  "
comment
" ...  I was able to set up the printer and download the software in about 30 minutes. ... Overall a painless set up experience so I definitely recommend for beginners who are trying to get their feet wet.  ...  "
comment
" ...  Quick and easy setup however build plate itself was not 'truly' level.  ...  "
Product Reliability
 6
new, months, days, upon, things
+83%
-17%
comment
" ...  Worked right out of the box  ...  "
comment
" ...  I've printed non stop for 3 days now and it's doing great.  ...  "
comment
" ...  Got a replacement and it worked great! ... Every time you reboot this printer, it comes up with a new MAC address.  ...  "
comment
" ...  I've already started researching how to model things on my own.  ...  "
Ease of Use
 5
simple, set, easy, setup, fun
+100%
comment
" ...  - Ease of use  ...  "
comment
" ...  It's amazing to me how simple this was to setup and use.  ...  "
For Kids
 4
+75%
-25%
comment
" ...  It was easy to set up and the kids were excited to check it out right away!  ...  "
comment
" ...  My son and I do projects together all the time.  ...  "
comment
" ...  Especially with our daughter joining Robotics club she can not wait to use it!  ...  "
Price
 4
price
+50%
-50%
comment
" ...  Honestly, that’s just unacceptable for how much this costs.  ...  "
comment
" ...  Don't waste your time and money!  ...  "
Marketplace
 4
response, contacted, company
+50%
-50%
comment
" ...  Back to Amazon it goes.  ...  "
comment
" ...  Contacted the company 2 separate times with no response.  ...  "
Design
 4
look, desk, really, looks, also
+75%
-25%
comment
" ...  It also looks nice sitting on a desk.  ...  "
Apps
 3
flashprint, could, monoprice, files, cura
+33%
-67%
comment
" ...  I don't care for the Flashprint software, but that could be just because of the old notebook computer that I am using it on.  ...  "

Review Spam Test     WARN

In order to keep our review summaries as accurate as possible, we aggressively detect fake reviews. We use various signals to detect unnatural patterns and will gradually expose them here.

Specifications

No specs available.